LATEST ADDITIONS

Michael Fremer  |  May 19, 2011  |  First Published: Dec 31, 1969  |  3 comments
I won't debate here how to make a turntable's platter go around. Choose your favorite: belt vs direct drive, idler wheel vs belt, spring-windup vs wind power, whatever. As far as I'm concerned, there's nothing to debate. Each of these technologies has its pluses and minuses, but none can produce CD's accuracy of speed and inherent freedom from wow and flutter.
Michael Fremer  |  Apr 01, 2011  |  2 comments

Still, some might find the new records too aggressive. I’m not in that group, but it sounds as if Mr. Grossinger mastered the original LPs, manipulating the tonal balance as he saw fit, whereas it sounds as if the GZ folks just took the files they were sent and cut. I’m just surmising that. It could be the ‘soft’ lacquer versus the ‘hard’ copper.

Michael Fremer  |  Mar 22, 2011  |  First Published: Dec 31, 1969  |  1 comments
Strain-gauge phono cartridges are rarely made and seldom heard; for most vinyl fans, they are more myth than fact. Panasonic once made one, as did Sao Win, but those were decades ago. I've heard about those two models for years but have never seen, much less heard one.

As if he's not got enough to do building his extensive lines of moving-iron cartridges, preamplifiers, amplifiers, and speakers, Soundsmith's Peter Ledermann also makes a full line of strain-gauge cartridge systems available with a choice of six user-replaceable stylus profiles. I believe the Soundsmith is the only strain-gauge cartridge currently made anywhere in the world. Ledermann says it takes him a full day to build one.

Michael Fremer  |  Dec 27, 2010  |  First Published: Dec 31, 1969  |  0 comments
Michael Fremer  |  Nov 07, 2010  |  First Published: Dec 31, 1969  |  0 comments
Why bother with three phono preamps most of us can't afford? For the same reason the enthusiast automobile magazines cover the newest Ferraris and Lamborghinis: just reading about them is fun.
Michael Fremer  |  Oct 31, 2010  |  First Published: Dec 31, 1969  |  0 comments
Ideally, LPs should be played with the pickup stylus remaining tangential (ie, at a 90° angle) to the groove—just as the lacquer from which the LP was ultimately stamped was cut in the first place. Over the years, many attempts have been made to accomplish this. Back in 1877, Thomas A. Edison's original machines tangentially tracked his cylinders, but Emil Berliner's invention of the flat disc put an end to cylinders altogether. In the 1950s, a number of companies marketed so-called "tangential" trackers that used dual arms, based on conventional pivoting arrangements, to change the angle at which the headshell was mounted as it moved across the LP side. In 1963, Marantz introduced the SLT-12, which used a plastic pantograph to move the stylus across the record surface. Garrard's Zero 100 pivoting arm controlled its independently pivoting headshell with a bar that extended from the main bearing of the tonearm.
Michael Fremer  |  Sep 23, 2010  |  First Published: Dec 31, 1969  |  0 comments
This massive, two-box beauty from Denmark costs $60,000, and I wish I could tell you it wasn't really better in most ways than the already outlandishly priced and sonically superb Boulder 2008. I can't.
Michael Fremer  |  Aug 19, 2010  |  First Published: Dec 31, 1969  |  11 comments
As long as you're spinning an LP for your listening pleasure, and if digitizing it at a resolution of 24-bit/192kHz is transparent to the analog source, why not record and store the LP on your computer at that high sampling rate for future convenient playback via iTunes or for iPod use, or for burning to CD-R? And, while you're at it, why not record the LP unequalized and apply the RIAA curve in the digital domain, where you're not dependent on capacitors and resistors that are imprecise to begin with, and can drift over time? With no drift of phase or value, the virtual filter's results should be better than with any analog filter. And in the digital domain, you can program in any curve known, and select it at the click of a mouse. Aside from the sweat equity invested in programming it in the first place, it wouldn't add a penny to the program's cost.
Michael Fremer  |  Aug 19, 2010  |  First Published: Dec 31, 1969  |  2 comments
The minuscule electrical output of an analog signal from a moving-coil cartridge needs to be boosted before it can be converted to digital and equalized in the digital domain. Of course, you could use your current phono preamplifier and record an equalized signal to hard disk, but then you wouldn't get to experience Pure Vinyl's digital RIAA correction—nor would you be able to avail yourself of all the equalization curves provide by Pure Vinyl, of which there are almost too many to count.
Michael Fremer  |  Aug 19, 2010  |  First Published: Dec 31, 1969  |  0 comments
The minuscule electrical output of an analog signal from a moving-coil cartridge needs to be boosted before it can be converted to digital and equalized in the digital domain. Of course, you could use your current phono preamplifier and record an equalized signal to hard disk, but then you wouldn't get to experience Pure Vinyl's digital RIAA correction—nor would you be able to avail yourself of all the equalization curves provide by Pure Vinyl, of which there are almost too many to count.

Pages

X