I was tempted to buy this too until I saw a customer's comment on Amazon.co.uk:
"The brush itself is not very solid at all too and it certaninly does not dust off properly the record". What do you think, Mickey?
Allsop took the original model out of production when vinyl "died," but re-introduced it some years later in a new version that used replaceable cloth cartridges. They were more convenient to swap out than the older system but far more expensive.
At some point despite growing LP sales, Allsop once again stopped producing and selling the Orbitrac. I had been discussing the re-introduction of the Orbitrac with Brent Allsop, even to the point of offering to buy the rights and manufacture it myself, when Mr. Allsop was tragically killed in an automobile accident.
Recently a U.K. based reader sent me the closest thing to an Orbitrac I've yet seen. It's called a "HyperBRUSH™" and it's manufactured in Ireland and marketed by TRACKMate™. Though the company lists a U.S. distributor in Vancouver, WA. I could find no contact information and the product doesn't seem to be distributed in America.
The utterly clueless company markets a VHS cleaner and other such products on amazon.com but not the HyperBRUSH record cleaner. However, I did find it on Amazon.UK. for £9 (about $18).
It works similar to the Orbitrac and comes with a record cleaning solution that I didn't try. It also has a stylus cleaning pad that works well and another felt pad atop the cleaner that's not identified for any purpose. In fact the instructions don't identify the stylus cleaning brush and I bet some inexperienced users might use the felt pad instead of the one that's supposed to be used. Of course you won't make that mistake.
The HyperBRUSH doesn't replace a good wet cleaning system whether the inexpensive Spin Clean or a vacuum machine or the Audio Desk ultrasonic machine. However, the HyperBRUSH is very useful as a pre-clean for really dirty records when used with any of the wet machines so you don't gum up and foul the machine brushes.
The HyperBRUSH also includes a static reducing strip. Unfortunately the brushes aren't replaceable. The company says washing them with warm soapy water (followed by a very good rinse) will restore them but I've not yet reached that point with the one I've got here. Plus I have the original Orbitrac and enough replacement pads to last a lifetime (thanks to a barter deal with a reader).
Overall, I found the HyperBRUSH convenient to use on the turntable thanks to the over-the-spindle rotating feature and considering the low price, it's a worthwhile tool in one's record cleaning arsenal.
I was tempted to buy this too until I saw a customer's comment on Amazon.co.uk:
"The brush itself is not very solid at all too and it certaninly does not dust off properly the record". What do you think, Mickey?
As the mysterious "U.K. based reader" who sent Mikey over the sample, I thought I'd add my ten cents worth as I've been using mine quite a lot as I'm not blessed with an original Orbitrac.
After a couple of tries I stopped using the brush "dry" directly on my record deck as the results weren't as good as the carbon fibre brushes I already own. So it is used only as part of my wet cleaning process (oddly enough, remarkably similar to that used by Mikey in his DVDs!) and never with the mysterious fluid that accompanies the brush in the small green bottle.
I also just use the HyperBRUSH (how can a brush - sorry BRUSH - get hyper?) for the initial cleaning stage, which leaves my more expensive Mobile Fidelity and Clearaudio brushes free for the more sensitive main clean and final rinse stages.
So far I'm more than happy with its cleaning results, durability and how well it cleans up with some decent quality detergent under warm running water. So, as I write I'm happy and a little surprised (in a good way) with the quality of the device.
Stripped of all the extraneous flim-flam, repackaged and better marketed (the name's go to go for starters!), one could envisage it for sale from your regular HiFi website for at least double the money.
As Mikey said, utterly clueless company!
Hey Michael, I've been following your material on SRA using the digital microscope, as well as other articles you have referenced. I'm about to do a mono cartridge setup (Miyjima) on a VPI 10.5 armwand.
Does the 92 degree recommendation hold for mono cartridges as well? Thanks for your comments.
Larry
Rocketplay Casino rocketplay-de.com distinguishes itself through a combination of unique features designed to enhance player satisfaction. The platform boasts a modern, user-friendly interface that is both visually appealing and easy to navigate https://rocketplay-de.com/sign-up. One of its standout features is the extensive loyalty program, which rewards regular players with exclusive benefits and promotions. Additionally, Rocketplay offers a diverse game library powered by top software developers, ensuring high-quality graphics and smooth gameplay.